HPF5 light truck leaf spring for Russia market

Short Description:

Part NO. HPF5 JC NO. JCBHZA0159
Spec. 70*11/13(mm) Application Truck suspension system
Material SUP9/55Cr3/SAE5160H MOQ 50 SETS
Port Shanghai/Xiamen/Ningbo Payment T/T,L/C,D/P
Lead Time 20-30 days Warranty 12 months


Product Detail

Product Tags

This spring assy are widely used in Russia for light duty truck .

Spring Measurements Specs

Totally 6 blades , the 1st blade Width(mm)*Thickness(mm): 70*11, 2-6 blade Width(mm)*Thickness(mm): 70*13, Eye to Eye Measurement 1310 mm (Free Length Measurement),Tolerance range within ±3mm . 2pcs biametal bushesØ25*Ø30*68 comes to install spring eyes .

Free Arch Measurement (see picture) 106mm,Tolerance range within ±5mm .

All datas are obtained by measuring the new produce product .

We have full range material stock:width 40mm-150mm,thickness 5mm-60mm,material grade SUP9, SUP11A , 55Cr3, SAE5160H , 50CrVA , 51CrV4 , 52CrMoV4 .

Our products high quality control by the advanced production line :automatic eye rolling machine , automatic queching machine,automatic parabolic machine .

We are in a good position not only to supply you high quality and competitive price , but also the excellent after sales service,Well-trained engineers will offer you any technical supports .

We got ISO9001 certification,our product acquired goods feedbacks from our customers .

Small trial orders can be accepted, sample is available.

We will provide the technical drawings to the customer to check all the details, We have a professional quality inspection section that will inspect each product before shipment and provide the inspection report to the customer . We also can help customers arrange all matters for the shipment delivery .

Key Points Keep The High Quality

1) Raw matrail .
Thickness less than 20mm. we choose SUP9/55Cr3/SAE5160H as the product material
Thickness from 20-30mm. wE choose SUP11A/50CrVA
Thickness more than 30mm. We choose 51CrV4 as the raw material
Thickness more than 50mm. We choose 52CrMoV4 as the raw material
2) Quchenging Process
We strickly controled the steel temeprure around 800 degree.
we swing the spring in the qenching oil among 10 seconds according to the spring thickness.
3)Shot Peening.
Each assmembing spring set under stress peening .
Fatigue test can reach over 150000 cycus
4) Painting
Each leaf under cataphoresis painting.
Salt spray testing reach 500hours

Production Process

material-cutting

1.Material Cutting

Edge-Cutting

4.Edge Cutting

Stress-Peening

7.Stress Peening

Punching

2.Punching

Quenching

5.Quenching

Assembling

8.Assembling

Eye-Rolling

3.Eye Rolling

Tempering

6.Tempering

Painting

9.Painting

FAQ

Q1: What type of leaf spring could you produce ?

A: We can produce most kinds of springs in the market. especially on the parabolic springs.

Q2: What material could you supply for leaf spring?

A: Our material grade should be SUP9/SUP9A /SUP11A/51CrV4 /52CrMoV4/ even 55Cr3 and  SAE5160H as well .

Q3: How long will be your delivery time?

A: 20-40days. If material stock enough around 20days. if not,would be 40days

Q4: What payment terms are acceptable?

A: TT and LC at sight

Q5: What is the packing?

A: No fumigation wooden pallet . we also can pack according to whatever you request if reasonable.

Q6:How about the surface finishing ?

A : electrophoresis coating (black,red,gray,or as customer’s requests )


  • Previous:
  • Next:

  •